Dealing with furnace malfunctions is one of the most inconvenient aspects of being a homeowner, particularly in the winter when home heating is absolutely essential. The good news is that Boonstra Heating and Air Conditioning offers prompt furnace repairs in Kitchener, so locals can count on us whenever something goes wrong!
Identifying and resolving common furnace problems quickly is crucial for homeowners to ensure their heating systems operate efficiently and reliably. Boonstra Heating and Air Conditioning’s diagnostic proficiency is vital to quickly resolving these problems and getting you back to enjoying the comforts of your home in no time. The following are some typical furnace issues we’ve identified and repaired over the years:
· Defective thermostat: A broken thermostat or inaccurate temperature readings could lead to a shortage of heat.
· Problems with the pilot light: The furnace may not generate heat if the pilot light is out or not working correctly.
· Ignition problems: The furnace may not start if there are difficulties with the ignition system.
· Inadequate airflow: Inadequate heating may be caused by blocked air vents or problems with the blower motor.
· Clogged air filters: When airflow is restricted by dirty or congested air filters, the furnace’s capacity to heat effectively is diminished.
· Banging or rattling: Weird noises may be caused by broken or loose parts, problems with the blower motor, or both.
· Screeching: When operating, a worn-out belt or a broken blower motor may make screeching noises.
· Problems with the thermostat: An excessive number of on/off cycles in the furnace may be the result of a broken thermostat.
· Blocked air filters: Short cycling may result from reduced circulation caused by dirty filters.
· The pilot light won’t stay lit: The pilot light may frequently go out due to a malfunctioning pilot valve.
· Ignition errors: The furnace may not start if there are issues with the ignition system.
· Broken heat exchanger: A broken heat exchanger can cause carbon monoxide to escape into the house, which is extremely dangerous for your health and needs to be addressed immediately.
· Inaccurate temperature readings: Erroneous temperature measurements or a broken thermostat may have an effect on the heating cycle.
· Problems with wiring: The thermostat and furnace may not be able to communicate with one another due to bad wiring or connections.
· Leaky ducts: Heat loss and decreased efficiency may arise from leaks or gaps in the ducting.
· Limited or blocked ducts: Blockages in the duct system might prevent warm air from being distributed evenly throughout the house.
· The buildup of residue: An unclean flame sensor may trigger an early furnace shutdown.
· Sensor fault: Problems with the flame sensor could keep the burner from lighting up adequately.
The lifespan and effectiveness of furnaces depend on routine maintenance and timely repairs. Experienced HVAC technicians, such as those at Boonstra Heating and Air Conditioning, have the experience to identify and resolve these problems successfully, giving homeowners a dependable and well-operating furnace throughout those chilly Kitchener, Ontario winters!
Boonstra Heating and Air Conditioning is delighted to provide meticulous furnace repairs in Kitchener and the surrounding areas. Our business has over 60 years of experience in the HVAC field and counting! Our certified HVAC technicians are prepared to go above and beyond to ensure your comfort is restored quickly and without hassle. Here’s what you can anticipate when you contact us to repair the heating system in your home:
1. Initial assessment: One of our HVAC technicians will do a thorough furnace examination. This means inspecting the outside, searching for obvious flaws, and evaluating essential components.
2. Diagnostics test: With the use of innovative diagnostic tools, our licensed specialist will identify the exact problem with your furnace.
3. Repair solutions: Our skilled technician will begin by determining the issue at hand and then decide which solutions are required.
4. Repair Solutions: You will receive a report for your records that details our findings, including the cause of the problem, the required furnace repairs, and substitute components.
5. Fixing the issue: Upon your approval, our knowledgeable specialist will begin completing the necessary repairs. This may mean fixing electrical faults, replacing damaged components, or taking care of any other difficulties affecting the proper operation of the heating system.
6. Final furnace test: Once the repairs are finished, the expert is going to test the furnace one last time to make sure everything works as it should.
7. Tidy the work area and maintenance suggestions: Apart from providing guidance on ongoing maintenance to ensure the furnace is functioning correctly, our qualified technician will tidy up and enable you to resume your regular schedule.
Frequent maintenance and inspection are essential to avoiding furnace problems and guaranteeing the effective and secure functioning of any heating system. Here is what you can do to prevent problems from arising from your furnace throughout the year:
· Preventive measures: Having an expert HVAC technician evaluate your home on a regular basis can help find possible problems before they become more serious and require expensive repairs. Technicians are able to identify and resolve difficulties with malfunctioning parts, gas leaks, ignition system malfunctions, and more during scheduled maintenance visits, saving you the headache later on.
· Enhancing efficiency: Professional adjustment of the heating system guarantees optimal performance. As a result, the furnace can operate longer and have reduced energy costs over time.
· Enhancement of air quality: The furnace filter is essential for removing allergies, dust, and debris from the air. Particles like these have the potential to build up over time and decrease your indoor air quality. Maintaining clean and healthy air quality in your house can be achieved by routinely cleaning or replacing the filter every one to three months.
· Effective airflow: When an air filter is obstructed or unclean, less air is able to reach the furnace, which has to work harder to heat the house. By changing the air filter, you can keep the airflow optimal and the furnace running smoothly.
· Longer furnace lifespan: By keeping important furnace components free of dust and debris buildup, a clean filter lowers the likelihood of wear and tear. As a result, the furnace will last longer, and homeowners will save money on unnecessary replacements.
· Consistent heating: A well-maintained furnace with clean ducting can distribute warm air more evenly throughout your home, providing uniform and comfortable heating.
· Energy savings: An efficiently running furnace requires less energy to operate, leading to savings on utility bills. Regular maintenance and duct cleaning every two to three years contribute to the overall energy efficiency of your HVAC system as a whole.
Preventing furnace issues primarily requires proactive, ongoing maintenance along with expert yearly inspections. These procedures improve the heating system’s longevity and effectiveness while also improving indoor air quality and your home’s general comfort. With the help of the team at Boonstra Heating and Air Conditioning, we can provide comprehensive maintenance services, ensuring your furnace operates optimally throughout the year.
For reliable and effective furnace repairs in Kitchener, contact oru team at Boonstra. Here’s why you can count on us to restore your home heating in no time:
· 24/7365 repairs: Boonstra Heating and Air Conditioning is aware of how urgent furnace problems might be, especially in the event of bad weather. Our staff is dedicated to offering prompt solutions, and we are available around the clock, 365 days a year.
· After-hours availability: Issues with furnaces can occur at any time. Boonstra understands and offers repair services on the weekends, holidays, and beyond usual business hours.
· No additional fee: Boonstra Heating and Air Conditioning prioritizes customer satisfaction and makes sure that repairs after-hours, on weekends, and on holidays come at no extra charge.
· Emergency scenarios: Boonstra provides same-day furnace repair services for furnace emergencies. This guarantees that urgent issues are resolved quickly, reducing discomfort and annoyance.
Boonstra Heating and Air Conditioning is proud to employ a group of exceptionally knowledgeable and experienced technicians who are proficient at identifying and fixing a wide variety of furnace issues. Boonstra’s technicians have the skills and resources necessary to accurately diagnose furnace problems quickly and accurately.
We are dedicated to providing high-quality labour and a service and aim to surpass customer expectations with each furnace repair project. Additionally, our objective is to guarantee that your restored furnace runs as efficiently as possible, giving your house dependable heating and comfort.
To book your furnace repair in Kitchener, give us a call directly to set up a time that works best for your schedule! You can also reserve your appointment with us online using our booking form.
How do you fix a furnace that is not heating?
Fixing a furnace that is not heating involves identifying and addressing the underlying issues with your heating system. Here are the general steps you can take to troubleshoot and potentially fix a furnace that is not generating heat:
· Make sure the desired temperature is selected on the thermostat.
· Check to make sure “Heat” is selected on the thermostat.
· If necessary, change the batteries in the thermostat as well.
· Look for debris and obstructions in the furnace air filter.
· Replace the filter with one that is new if it is dirty. Reduced heating efficiency might result from restricted airflow caused by a blocked filter.
· If your furnace runs on gas, make sure the pilot light is on.
· Make sure the pilot light is on. If not, have a technician relight it.
· A gas supply problem could be indicated if the pilot light won’t stay lit. You will also need to call a technician for this.
· For electric furnaces, check for clicking noises that suggest an ignition attempt.
· If there isn’t any clicking, the igniter or ignition control may need to be replaced if there is a problem.
· The burner flame is tracked by the flame sensor. It could turn off the furnace if it’s unclean or broken.
· If required, replace the flame sensor or have it cleaned.
· Verify that the gas valve that feeds the furnace with fuel is open.
· Get in touch with a qualified technician to investigate and fix any suspected problems with the gas supply.
· Examine your circuit breaker and reset it if the furnace isn’t getting any power.
· If it trips frequently, there can be an electrical problem that needs to be fixed by an experienced technician.
· Make sure there are no obstructions or blocks in the air ducts. Heat loss may occur via ductwork leaks or gaps.
· Examine the wiring between your thermostat and the furnace by doing a thermostat wiring check.
· Damaged or loose wiring might interfere with heating and cause issues with connectivity.
Always put safety first when addressing furnace problems, particularly those involving gas components. It’s advised to get professional assistance from a reputable HVAC provider, such as Boonstra Heating and Air Conditioning, if in doubt or if the issue continues. Our skilled technicians are capable of safely and successfully diagnosing and resolving complicated furnace issues.
Is it worth fixing a furnace?
Determining whether it’s worth fixing a furnace depends on various factors. Here is what you should consider before moving forward:
· Equipment age: It may be worthwhile to consider a replacement if your furnace is nearing the end of its anticipated lifespan, which is normally between 20 and 25 years, and if the repair is substantial. Purchasing a newer, more energy-efficient furnace could result in long-term cost savings.
· Cost of repairs: Considering the age of the furnace, it’s important to determine if the investment is justified if the repair costs are high. Replacing the furnace could be a more cost-effective option if the expense of repairs is high compared to the cost of a new unit.
· Energy-efficiency goals: Modern furnaces use less energy than older, outdated units. Purchasing a newer, high-efficiency furnace could eventually save you money on energy costs if your present furnace has a poor efficiency rating.
· Recurring problems: If your furnace keeps breaking down or needs several repairs, it can be a sign that the system is not as dependable as it once was. In certain situations, it could be wiser to make a longer-term investment in a new furnace.
· Safety: It’s critical to put your family’s safety first if the furnace presents any safety threats, such as the possibility of carbon monoxide leaks or heat exchanger issues. In some situations, replacement might be required for your general well-being.
· Increasing energy bills: Expenses related to a broken or inefficient furnace can increase your monthly utility costs. A more energy-efficient replacement furnace could save you money if your energy bills have been rising and it’s not working at its best.
· Comfort in your home: If you are happy with the way your existing furnace performs and it fulfills your heating needs, you may want to consider having it repaired. However, switching to a new system can be worthwhile if you’re hoping for enhanced comfort, quieter operation, or innovative features.
· Discounts and offers: See if there are any discounts or other offers available for switching to a more energy-efficient furnace. Tax rebates are provided by certain governments or companies to homeowners who wish to purchase energy-efficient heating systems.
What are the most common signs your furnace needs a repair?
It is crucial that you recognize the initial indications of furnace malfunctions in order to avoid more serious issues. The following are some typical indicators that a furnace repair Kitchener is necessary:
· If your furnace is operating, but the heat is either not reaching you or is not reaching far enough.
· Unusual noises like popping, rattling, screeching, or beating.
· Short cycling is when the furnace frequently turns on and off.
· An increase in energy costs, either abrupt or gradual, without a change in usage.
· Your house isn’t heated evenly throughout.
· Your furnace is emitting strange odours.
· A pilot light that won’t stay lit or has an unusual colour in gas furnaces.
· Corrosion on the burner or other parts, or the soot on the walls next to vents or surrounding the furnace.
· Your furnace is difficult to start or takes longer than normal to heat your house.
· The sound of a carbon monoxide detector warning suggests a possible leak. In the event that this occurs, leave your house right away and call 911.
It’s essential to arrange for a professional examination and furnace repair with a competent HVAC systems expert, like those at Boonstra Heating and Air Conditioning, if you observe any of these signs. If these signs look familiar, reach out to the team and book your repair appointment today!
“The technician who came to service my furnace was polite and very thorough. I was expecting to just have a filter installed but he double checked to make sure the airflow and furnace was in tiptop shape. He even peeked at my AC unit quickly as he was leaving to let me know it should be cleaned! Super great service as always.“
